Australian Centre for Precision Optics logo

Precision Optics

Products & Services

Customers

Information

Contact Us

About Us

Australian Centre for Precision Optics

Home > Information > Publications > LIGO

LIGO

Bulla R; Davis G; * Farrabt D; Leistner A; Lesha F; Oreb B; Pavlovic E; Seckold J; Sona C; Stuart W, and * Walsh C. Fabrication and measurement of optics for gravitational wave detectorsFremantle, WA; 1998.

---. LIGO Core Optics Fabrication and TestingChristchurch, New Zealand; 1998.

D I FARRANT; A J LEISTNER; B F OREB; M A SUCHTING, and C J WALSH. 'Metrology of LIGO pathfinder optics'.

Farrant; D.I.; Leistner; A.J.; Oreb; B.F.; Suchting; M.A. and Walsh, and C.J. Metrology of LIGO pathfinder optics, Proc. SPIE Conf. on Optical Manufacturing and Testing II, San Diego USA, 2729.

Farrant D; Hariharan P; Leistner A J; Oreb B F; Suchting M, and Walsh C J. LIGO Metrology Review. 1996(143).

Leistner, A. J.; Suchting, M. A.; Neuweger, P. A.; Seckold, J. A.; Bulla, R. W., and Lennox, P. J. LIGO pathfinder optics: fabrication techniques & procedures. Proc. SPIE.

Leistner AJ; Farrant DI; Oreb BF; Pavlovic E; Seckold J, and Walsh CJ . LIGO optics manufacture: figuring transmissioncore optics for best performance; 1998.

Oreb BF; Farrant DF; Walsh CJ; Leistner AJ; Lesha FJ; Fairman PS, and Sona CM. Metrology of LIGO Core OpticsDenver.

Oreb BF; Farrant DI; Walsh CJ; Leistner AJ; Lesha FJ, and Fairman PH. Metrology of LIGO core optics; 1998.

Oreb BF; Farrant DI; Walsh CJ; Leistner AJ; Lesha FJ, and Fairmn PS. Metrology of LIGO core opticsAdelaide: University of Adelaide; 1997: 21.

Walsh; C.J.; Leistner; A.J. and Oreb, and B.F. Pathfinder Project Final Report by CSIRO to LIGO, Confidential Report No. C0152, 22 .

Walsh and CJ. Power Spectral Density Analysis of LIGO substrates.

Walsh CJ; Leistner AJ, and Oreb BF. Power Spectral Density Analysis of (LIGO Substrates) Optical substrates for gravitational-wave Interferometry. Applied Optics. 1999; 38(22):47904800.

Walsh CJ; Leistner AJ; Oreb BF; Seckold J, and Farrant DI. Manufacture of LIGO core optics at CSIRO; 1998.

Walsh CJ; Leistner AJ; Oreb BF; Seckold J; Farrant DI; Bulla R; Lennox P; Lesha F; Pavlovic E; Sona C; Stuart W; Yin R, and Davis G*. Manufacture of LIGO Core Optics at CSIRODenver; 1999: 378224.

Walsh CJ; Leistner AJ; Oreb BF; Seckold J; Farrant DI, and Pavlovic E. Metrology of transmission optics for LIGO; 1998.

Walsh CJ; Leistner AJ; Oreb BF; Seckold JA; Farrant DI, and Pavlovic E. Metrology of Transmission Optics for LIGODenver, July 99.

Walsh CJ; Leistner AJ; Seckold J; Oreb BF, and Farrant DI. Fabrication and Measurement of Opics for LIGO. Applied Optics. 1999; 38(13):28702879.

Contact:
Ms Katie Green
Materials and Fabrication Manager
Phone: +61 2 9413 7620
fax: +61 2 9413 7200
Email:acpo

 
Go to CSIRO Industrial PhysicsHome Page

ACPO is a fully owned centre of CSIRO, Australia's most trusted and respected science and technology research organisation.

Last updated by Peter saunders 7 February, 2012

© Copyright 2011, CSIRO Australia. Use of this web site and information available from it is subject to our Legal Notice and Disclaimer and Privacy Statement.